 |
 |
|
 |
|
|
10"
Miter Saw - 3 HP |
14"
Miter Saw - 5 HP |
• 1-1/2" Solid to 2-1/2" Shapes
• Angles from 0° to 45° - either
way
• Positive index holes - up and
down stops
• Two cam-lock vises - lever-lock
for table
| KM1O - 10" Miter
Saw - 1 PH or 3 PH |
220 |
| Specify)... |
lbs |
| WS1O - Adjustable Work Stop... |
6 lbs. |
| 12-M - Heavy Duty Stand... |
46 lbs |
| 12-W - Tray Top Stand for Wet Sawing...
|
60 lbs. |
|
• Angles 0° to 45° either way
• 1" spindle
• Front lever
lock
• Heavy duty stand
·•
2-1/2" solid - 3" pipe
MODEL
KM14 - 14" miter saw with 5 HP -
3 PH motor - 220/440V - less wheel - Weight 450
lbs. |
| 16"
- 18" Miter Saw - 10 HP |
20"
- 22" Miter Saw - 15 HP |
Rugged
Cast Iron
Arm & Trunnion
1" Spindle
Sealed Bearings
MODEL
KM16-18 - 16" OR 18" ABRASIVE MITER
SAW with 10 HP, 3 PH motor. Please specify
voltage. Miters either direction 45° Two cam
vises. Low voltage manual starter. DRY MODEL ONLY.
Less abrasive wheel. Capacity: Straight cuts -
3" solid, 4-1/2" pipe and shapes; at
45° - 2-1/2" solid, 4" shapes. Wt:
650 lbs. |
MODEL
KM2O-22 - 20" ABRASIVE MITER SAW
with 15 HP, 3 PH motor, magnetic starter (please
specify voltage). Air operated chain vise standard.
Less abrasive wheel. Dry model shown. Capacity:
Straight cuts - 4" solid bar, 6" most
shapes; at 45° - 3" solid bar, 5"
shapes. Wt: 1000 lbs.
MODEL KM 20-22W
- 20" WET ABRASIVE MITER SAW same
as above, with wet system and magnetic starter.
Wt: 1295 lbs. |
| 20"
- 22" Miter Saw With Dust Cover Housing |
 |
MODEL
KM20-22V-15
• 20" or 22"
wheel.
• Spindle 1", 2500 RPM.
• Double Air Chain Vises
• Capacities:
Straight 4" solid, 6" most shapes; at
45º - 3" solid, 5" most shapes.
• Covered hood with vacuum base.
•
Dimensions - L 52" x W 63" x H 68".
• Miters 45º left or right.
Model KM20-22V-15 15
Model KM20-22V-20 Same as above, with
20 |
| Hi-Speed
- Non Ferrous 14" Miter Saw |
FOR
CUTTING ALUMINUM AND OTHER
NON-FERROUS MATERIAL WITH STEEL BLADE
• Heavy Duty
• Double V-Belt Drive
• 5 HP, 3 PH, 1750 RPM with Magnetic
• Starter
• SFPM 6250 or 12500
with 3450 Motor
• Power Down Feed
• Double Air Vises
• Mitre both
ways
• Vise open 6"
•
Spindle 1"
• 14" Blade (not
furnished)
Model HSM14 - 14"
HIGH SPEED MITER 5 HP, 3 PH motor with
magnetic starter, 1725 or 3450 RPM available.
Please specify speed and voltage. For non-ferrous
only. Capacities: Pipe 4-1/2", Square 4-1/2"
Dimensions: 30" wide, 48" deep, 60"
high Weight: 750 lbs.
|
 |
| |
For more information, phone 800-990-0559 |
