 |
 |
|
 |
|
 |
 |
| |
|
|
 |
|
| |
|
|
 |
|
| |
|
|
 |
|
| |
|
|
 |
|
| |
|
|
 |
|
| |
|
|
 |
|
| |
|
|
 |
 |
|
 |
| |
 |
|
Space
Saving Moveable
Saw Head |
|
| |
|
|
Saw Head Travels
on
Ground Square Ways |
|
| |
|
|
Hydraulically
Lifted Outer
Table with Ball Transfer |
|
| |
|
|
Built
in Positioning Scales on Inner Table |
|
| |
|
|
Hydraulic
Blade Tension |
|
| |
|
|
Built
in Positioning Scales on Inner Table |
|
|
|
 |
|
| |
|
 |
|
Replacement
parts for your Marvel bandsaw machine |
|
| |
|
|
|
|
 |
|
 |
|
 |
|
|
| COLD
SAW MATRIX LEGEND |
| Click here for the Cold
Saw Matrix Legend |
|
 |
Mild
steel. Cold/Hot Rolled
Solid material. Low carbon
Leaded steel |
ALL
MODELS |
 |
Tough
alloy
Solid stainless steel. (Small Diameter)
Tool steel (M-2)
Inconel/Hastelloy/Titanium |
ALL MODELS
350/370 MODELS
370 MODELS (limited) |
 |
Mild
steel tube and pipe
Cold and hot rolled tube/pipe low carbon |
ALL MODELS |
 |
Tough
alloy steel tube thin wall (depending
on tube diameter)
Stainless steel tubing up to 3/8" wall.
Alloy tube with over 3/8" wall |
ALL MODELS
350/370 MODELS |
 |
Mild
steel square or rectangular tube
Low carbon steel tube.
To fit capacity of machine. |
ALL MODELS |
 |
Non-Ferrous
Material
Aluminum solids, Brass, Copper
Bronze, Lead, Plastic. To fit capacity
of machine.
IDEAL MACHINE IS THE 370 L MODELS |
ALL MODELS |
 |
Non-Ferrous
Tubing
Aluminum solids, Brass, Copper
Bronze, Lead, Plastic. To fit capacity
of machine.
IDEAL MACHINE IS THE 370 L MODELS |
ALL MODELS |
 |
Non-Ferrous
Extrusions
Aluminum solids, Brass, Copper
Bronze, Lead, Plastic. To fit capacity
of machine.
IDEAL MACHINE IS THE 370 L MODELS |
ALL MODELS |
|
| |
|
NOTE:
When cutting non-ferrous materials the Euromatic
370 PP/L-S/L with a precision ground blade at
3000 rpms, will give optimum finish.
WARNING: It is not advisable to run a high speed
steel blade higher than 1500 rpms.
WARNING: Steel must not be cut on the PP/L or
S/L models. |
|
|
|
