Bookmark
|
 Tell a friend
SEARCH FOR A PRODUCT :
 
 
 
   
   
   
   
   
    Space Saving Moveable
Saw Head
    Saw Head Travels on
Ground Square Ways
    Hydraulically Lifted Outer
Table with Ball Transfer
    Built in Positioning Scales on Inner Table
    Hydraulic Blade Tension
    Built in Positioning Scales on Inner Table
 
  Replacement
parts for your Marvel bandsaw machine
 
CUTTING APPLICATION MACHINE SELECTION MATRIX
Click here for the Cold Saw Matrix Legend
    Cut Super
Cut		 Super
Technics		 Super
Technics		 OMP
Euromatic		 OMP
Euromatic		 OMP
Euromatic		 OMP
Euromatic
Cutting Requirements   250 275 350 350 SA 370 S 370 PP 370 PP/L 370 S/L
Mild steel solids 1 1/4" max X X X X X X    
Mild steel solids 2 1/8" max   X X X X X    
Mild steel solids 3 1/8" max     X X X X    
Mild steel solids 3 3/8" max     X X X X    
Mild steel solids 4 3/4" max         X X    
Mild steel solids 5 1/16" max         X X    
Tough Alloy Steel (Occasional)                  
Tough alloy steel up to 1" X X X X X X    
Tough alloy steel up to 1 1/2"   X X X X X    
Tough alloy steel up to 2"     X X X X    
Tough alloy steel up to 2 1/2"     X X X X    
Tough alloy steel up to 3 1/4"         X X    
Tough alloy steel up to 4"         X X    
Tough Alloy Steel (Production)                  
Tough alloy steel 1"-4"         X X    
Mild Steel Tube (Production)                  
Mild steel tube up to 2 3/4" X X X X X X    
Mild steel tube up to 3 3/8"   X X X X X    
Mild steel tube up to 4"     X X X X    
Mild steel tube up to 4 3/4"     X X X X    
Mild steel tube up to 5 1/16"         X X    
Tough alloy thin wall tube                
Tough alloy tube - 2 3/4" X X X X X X    
Tough alloy tube - 3 3/8"   X X X X X    
Tough alloy tube - 4"     X X X X    
Tough alloy tube - 4 3/4"     X X X X    
Tough alloy tube - 5 1/16"         X X    
Sq./Rect. Tubing (Production)                  
Mild steel 1 3/4" x 3 7/8" X X X X X X    
Mild steel 2 3/8" x 2 3/4"   X X X X X    
Mild steel 2 3/4" x 6"     X X X X    
Mild steel 3 1/8" x 4 3/4"     X X X X    
Mild steel 3 1/2" x 6 1/4"         X X    
Mild steel 4" x 6"         X X    
Non-Ferrous                  
Non-ferrous solid 2 /1/2" max @ 44 rpm @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous solid 2 7/8" max   @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous 3 5/8" max     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous solid 4 1/4" max     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous solid 5 1/16" max         @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-Ferrous Tubing                  
Non-ferrous tube up to 2 3/4" @ 44 rpm @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 3 3/8"   @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 4"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 4 3/4"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-ferrous tube up to 5 1/16"         @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Non-Ferrous Extrusion                    
Extrusion 2" x 2 3/4" @ 44 rpm @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 2 3/8" x 2 3/4"   @ 44 rpm @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 2 3/4" x 6"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 3 1/8" x 4 3/4"     @ 88 rpm @ 44 rpm @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
Extrusion 3 1/2" x 6 1/4"         @ 50 rpm @ 50 rpm @ 3000 rpm @ 3000 rpm
 
NOTE: When cutting non-ferrous materials the Euromatic 370 PP/L-S/L with a precision ground blade at 3000 rpms, will give optimum finish.
WARNING: It is not advisable to run a high speed steel blade higher than 1500 rpms.
WARNING: Steel must not be cut on the PP/L or S/L models.
 
Click here for the Cold Saw Matrix Legend
 
 
Copyright © 2006 MarvelBandsaw.com. All Rights Reserved.

 
 
 is a registered trademark of Marvel Manufacturing Co., Inc.