Marvelbandsaw

Bookmark

Tell a friend

			Space Saving Moveable Saw Head

			Saw Head Travels on Ground Square Ways

			Hydraulically Lifted Outer Table with Ball Transfer

			Built in Positioning Scales on Inner Table

			Hydraulic Blade Tension

			Built in Positioning Scales on Inner Table

Replacement
parts for your Marvel bandsaw machine


Spartan Ironworkers Get New Standard Feature
All of the two cylinder Spartan ironworkers now offer an electric back gauge as standard equipment. The Spartan Ironworkers are available in a range of 49 tons to a maximum of 175 tons. They feature both single and dual operation with all integrated tooling stations. Full control foot pedals, see through stripper, two hole die holder (D & DX series only) and halogen work light are only a few of the additional standard features found on the Spartan Ironworkers.
40 Reasons to purchase a Spartan Iron Worker

SELECT A BANDSAW FROM BELOW

IWW66D

IW88D

IW110D/2

IW135D

IW180DX

Punching

Punching Pressure

66 tons

88 tons

110 tons

135 tons

180 tons

Standard Tooling

1- 1/2" in
1/2"

1-1/2" in
5/8"

1-1/2" in 7/8"

1-1/2"in
1/2"

1-1/2" in
1-3/8"

Large Tooling

21/2" in 3/8"

2" in 1/2"

2" in 5/8"

2" in 3/4"

2" in 1

Oversize Tooling

6" in 1/8"

6" in 11/64"

8" in 11/64"

8" in 11/64

8" in 1/4"

Throat Depth

12"

DX Series

20"

Channel Flange Max

Stroke Length

3"-15/16"

Cycle/ Min ("3/4")

Work height

39-3/4"

41-1/4"

Flat Bar Shearing

Flat Bar Shear

14" in 9/16"

17-3/4" in 9/16

24" in 5/8"

24" in 11/16"

30" in 3/4"

Width and Thickness

10" in 3/4"

12" in 7/8"

12" in 1"

16" in 1"

16" in 1-1/8"

Blade Length

14-1/4"

18"

24-3/8"

30-1/4"

Angle Flange Time

Work Height

36"

36-1/2"

38"

36"

Angle Shear

90 Degrees

5" X 5"
in 1/2"

6" X 6"
in 1/2"

6" x 6"
in 1/2"

6" x 6"
in 11/16"

8" x 8" in 3/4"

45 Degrees

2-1/2" x 2-1/2" x 5/16"

3-1/8" x 3-1/8" in 3/8"

3-1/8" x 3-1/8"} in 3/8"

Work Height

43 - 3/4"

45-3/4"

48 -1/4"

46-1/2"

Bar Shearing

Round Bar

1-1/2"

1-3/4"

2-1/4"

Square Bar

1-1/2" x 1- 1/2"

1- 3/4" x1-3/4"

1-3/4" x1-3/4'

2 x2"

2-1/4" x2-1/4"

Channel Shear

I Beams

Work Height

48"

48-3/4"

52-3/4"

51-1/2"

54"

Notching

Rectangle Notches

2" x 3-1/2" in 5/16"

2" x 3-1/2"in 1/2"

2" x 3-1/2" in 1/2"

2" x 3-1/2" in 5/8"

V-Notcher @ Notcher Section

3 -1/2" x 3-1/2" in 3/8"

3-1/2 x3-1/2" in 1/2"

4" x 4" in 1/2"

V-Notcher@ Punch Section

5-3/4" x 5-3/4" in 1/4"

5-3/4" x 5-3/4" in 3/8"

5-3/4" x 5-3/4" in 1/2"

Work Height

36-1/4"

37"

52-3/4"

36-1/4"

Special Tooling

Single Vee Press Brake

10" Long x 2" Wide Vee

Multi Vee Press Brake

20" Long - 4 Vees

27-1/2" Long - 4 Vees

Pipe Notcher

4-1/2" Max

6-1/2" Max

4-1/2" Max

6-1/2" Max

Angle Bending

4" x 1/4"

4" x 5/16"

4" x 1/2"

Drive Motor

7.5 H.P.

10 H.P.

15 H.P.

20 H.P.

Net Wt.D:

3.969 lbs

4,807lbs

6,505 lbs

7,365 lbs

DX:

4,851 lbs

5,844 lbs

7,608 lbs

8,710 lbs

10,915 lbs

Machine Dimensions D:

68" x 31" x 67"

73" x 33" X 68"

74" x 33" X 69"

86" x 35" x 73"

DX:

82" x 31" x 67"

88" x 33" x 68"

83" x 33" x 71"

98" x 35" x73"

107" x 35" x 79"

For more information on these Marvel / Spartan Band Saw Machines please contact us at 562-927-3469 or by the e-mail link below.

info@bandsawblade.com

is a registered trademark of Marvel Manufacturing Co., Inc.