Hydraulically
Lifted Outer
Table with Ball Transfer
Built
in Positioning Scales on Inner Table
Hydraulic
Blade Tension
Built
in Positioning Scales on Inner Table
Replacement
parts for your Marvel bandsaw machine
Series 8 Mark II - Our
most popular band saw, a truly universal machine
capable of making virtually any conceivable straight
or miter cut (45° right & left).
High
Column also available- (increases
Vertical capacity by 6")
Standard
Column 18” (457mm)
High Column 18” (457mm)
Vertical
Capacity
Standard
Column 22”(560mm)
High Column 28”(712mm)
Vertical
Capacity @45 Deg.
Standard
Column 12 1/2”(324mm)
High Column17”(432mm)
Blade
Dimensions
Standard
Column 14’-6” (4420mm)
High Column 15’-6” (4724mm)
Wheel
Diameter
18”
(457mm)
Max.
Vise Opening
21”
(533mm)
Coolant Motor
1/8
HP (.09 kw)
Coolant
Capacity
20
Gal. (78L)
Blade
Drive Motor
2
HP (1.5 kw)
Blade
Speed
50-450
FPM (15-137 M/MIN)
Feed
Force
0-140
lbs (0-64 kg)
Shipping
Weight
2,870
lbs (1300 kg)
QUICK,
EASY BLADE INSTALLATION The hinged
upper band wheel cover and blade guard
swing out of the way to allow easy,
unobstructed installation of the band
blade.
AUTOMATIC
BLADE TENSIONING Once the band is
in place, a few strokes on the ratchet
handle (until it comes to a stop)
apply correct tension on the blade.
Four alignment screws on the band
wheel allow proper alignment of the
wheel for correct blade tracking.
AUTOMATIC
COLUMN TRAVERSE STOPS Stop dogs on
the Mark II can be set to limit the
forward and return travel of the saw’s
column. This feature considerably
speeds cutting cycles when the full
18” travel of the column is
not required for the sawing being
done.
IMPROVED
CHIP CONTROL The Series 8 Mark II
has a chip control system that cleans
the blade and collects chips for easy
removal. A powered wire brush and
two coolant jets wash chips off the
band blade immediately after it leaves
the cut. A deflector mounted on the
base of the column minimizes chip
accumulation and interference with
the saw operation.
For more information
on these Marvel / Spartan Band Saw Machines please
contact us at 562-927-3469 or by the e-mail link below.
